Engine water pump leakage is a common fault, but it is not incurable. If you encounter this situation, don't panic. Here are some solutions:
Check the water seal: When water leakage is found in the engine pump, the first step should be to check the water seal. If problems are found with the water seal, it should be replaced promptly.
Disassembly inspection: If a large flow of water is found to flow out of the water pump, in most cases, it is due to damage to the water seal of the water pump, but it is also possible that the water pump shaft and housing are corroded and damaged. In this case, it is necessary to disassemble the water pump for inspection and repair or replace it according to the situation.
Repair water seal: If water leakage is found, the water pump should be disassembled and the water seal repaired.
Firstly, remove the water pump cover, loosen the end fastening bolts, and take out the impeller and water seal components. If the surface of the static and dynamic rings is damaged and leaking, they can be closed by sanding them on a cast iron plate. If the gasket and corrugated ring are damaged, they should be replaced with new ones.
In short, engine water pump leakage is a common problem, but as long as the correct solution is taken in a timely manner, it can be easily solved. If you encounter this situation, don't hesitate, take action immediately!
